Friday Quick Tip ~ Scrubbers

For biodegradable pot scrubbers

make them out of jute or sisal.

I love these little scrubbers - even the nylon ones to be honest.

But in trying to limit what ends up in the landfill, 

I felt guilty that I liked them so much.

I tried making them with jute first. (darker one)

They work great, but wet jute has a distinct odor.

I use these for scrubbing the car, BBQ, etc.
I love that these get bugs off the bumper without scratching the paint.

For dishes, I use sisal (lighter one,) which is much more difficult to work with,

but doesn't sport the pungent odor.

Either way, when they are worn out,

just toss them in the compost pile.

Also, there are so many little tips that are just good ideas,
I thought every-so-often to do a quick tip might be fun.
Let me know what you think~

                                                           

The Other Big Project~(Vintage Trailer)

Mrs. Calabash?

Is that you?

Back here, I shared that we usually have a couple big projects

going at any one time.

The bricks still aren't finished, but they are getting closer.

The other "big project" has been to restore Mrs. Calabash.

You can see more about her here and here.

Once we got the necessities in order, we came to the point

where a decision needed to be made.

She needed to be re-sealed which involves removing all the windows, 
J-channel, eyebrows, trim, etc.

Did we want to go through all that just to have to do it again

in a year or two when we refurbished and painted her?

We chose to just do it all now.

We pulled Mr. LB's old project car out and tarped it.

Then Mrs. Calabash got the place of honor in the shop.

And we began the process. . .

At first it seemed like we just kept pulling her apart

and that nothing was being fixed,

which of course is part of the process.
Also at first, I was doing it myself, but it didn't take long for Mr. LB
to take pity and dig in too.
I started by removing the lower sections of skin (siding) 
to see what was under there.
Then, all the trim, windows, and J-channel came off.
I won't show every detail, but enough that hopefully 
you can see just what we've done.

From the first Aristocrat I saw, I was drawn to them.

I like their floor-plans and generous windows.

They do however, have a design flaw.

That bottom skirting board is exposed and sandwiches the paneling

so the water wicks right up and holds.

In researching ways to fix and prevent it from happening again,

I learned that deck sealants (and the sort) can react with the aluminum

so those were out.

The only thing that could possibly work was the black, smelly,

gooey, sticky, tar paint/sealer.

New skirting boards getting their icky coat of tar paint.

We had to take off more skin than I had initially thought,

up to the roof so everything could be "right."

More on that in a minute. 

One corner of interior paneling was damaged on the back passenger side corner
so I robbed the section from the front, behind the couch
leaving a nice big hole here.

Here's that minute, from a minute ago:)
At one point someone had tried to "fix" the bathroom corner
using incorrectly sized lumber and fencing staples!
so it had to come out in order to make it right.
At this point - right here - I almost cried.
She kept coming more and more apart.
Nothing was going back together yet.
This is the driver's side rear, and I couldn't make enough paneling for it,
so I did the next best thing.
We got white bead board and I antiqued it.

I was pleased with how well it turned out and how closely it matches.
(They had used a mauve and country blue floral el'cheapo paneling.)
I did the same with a piece of 1/4" plywood for the front 
where I robbed the real paneling.

Then finally, finally, finally, we got to start putting pieces back together
rather than tearing them apart.

You can see here, we also replaced several of the boards across the back that were not as sound as they could have been.

At this point, I actually went around her with the tar paint

and painted all the corners and any nook or cranny 

that I thought might be prone to moisture.

Also, the yellow batting that provided about as much insulation as a paper towel, was removed where we had to work but left where we didn't.
It really is that thin.
Over it or instead of it (depending upon where) we added rigid R5 insulation.

I can't even begin to express what a relief it was
to begin to see her starting to come back together.
Once all the insulation was in place, we began putting the skin back on.
That sounds easy enough, but getting it back on just right took time.
1/8 of an inch off in one spot can result in an inch off in another.
We were aware of this so made sure everything was right on as we worked.Luckily, that didn't go to terribly, though when we went to put the door back on, there was a bit of a bow in the wall as a result of having no additional support from doors or windows for the duration of the process.

Once we got the skin back on her, we got to sand and prepare for painting.

We were going to paint her ourselves.

My thought was that if someone else makes a run or does a sub-par job,

I would be pretty upset.

If I do it, I can only be mad at myself.

As it turns out, Mr. LB knows a fellow fisherman who does this for a living.

We talked about it and decided to let him paint her.

My comment was only, "Please let him know that this is advertising for his business - good or bad, it's up to him."

I think he told him something along the lines of, "This is my wife's baby, and I want to be able to walk again after it's painted."

Okay, not really, but he knows I want her done nicely.

I'm really not that mean (Well, most of the time.  Maybe don't ask my baby brother that question. :)

And here she is on her way to "the beauty parlor."

Sorry the picture is a little fuzzy.

This is about 5:30 AM, and it was barely light enough to get a picture.

We had to put the windows back in so that she could travel

the road to get her there.

We just put a half dozen screws in each and will pull them back out

in order to mask and paint.

She's on the docket to get the main body color Thursday,

then the accent color Friday.

Then, once she's back home, we'll get to seal her back up

with new putty-tape and all the trim, which I have been polishing

by hand all along in my spare time.

                                                           

Pullet Eggs and Antique Egg Scale

Finally!

The girls have been clucking like they have laid an egg,

but no eggs have actually been produced.

When I hear them,

I tell them they have to lay an egg to cluck like that.

So, one of them actually listened to me.

(I'm sure that's what it is.)

I've been checking for good measure.

And to my surprise, evening before last when I checked,

there was a treasure in the nest.

It's been a few years since I've had chickens,

and I missed them.

My friend Shirley used to love the pullet eggs.

She said they were just the right size.

Here you can see on my antique egg scale

that it doesn't even register as small.
Actually, it barely brings it up off the black line.

Yes, the scale works just fine.

It's another of those items that was built to last~ 

(like this and this)
If you have laying hens (or birds for that matter) 
you might keep your eye out for one.
I've only ever found one other.
It was the same as this one but completely rusted, and
I'm not sure if it worked.  Cost $45 = Not interested.
They are handy as the size of the eggs produced increases.

These hens have been "good girls" for the most part.

Though, I do have to remind them that chickens are not house pets.

They try to follow me in the house.

As have the lambs when they were younger.

What is it with these critters?

(Ignore mess please.  I was sorting piles to go to donation, also filled the garbage can you can see just out the door:)

We are certainly happy to be getting some "farm fresh" eggs again.
Now if the other 3 will just chip in and earn their keep,
we might be able to have breakfast.

                                                          

Grain Free Cheesy Bread - Yum

Howdy Folks,

I just wanted to share a little recipe I have with ya'll.

If you have followed along here for some time,

you probably know we don't eat a lot of grains.

There are certain dishes though, that just need "something."

This cheesy bread recipe is easy and pretty darn tasty.

I can't take credit for it as it was shared with me by a friend

a few years back - Thanks Pam:)

We especially like it with sloppy joes or chili.

You can find the recipe for my sloppy joes way back yonder.

(We still ate bread back then.)

Any-hoo, here ya go. Bon Apatite!

Cheesy Bread

2 Tbl. butter - melted

1/4 cup sour cream

1/4 cup grated parmesan cheese

1 egg

1/2 cup shredded cheese (cheddar etc)

1/8 tsp. salt

1/2 cup almond flour

3 Tbl. coconut flour

1 tsp. baking powder

 Mix all ingredients together.

Form 2 "logs" and divide into 6 portions (3 each.)

Flatten each portion onto greased baking sheet.

Bake at 350* for about 15 min.

That's it.
And here I need to apologize.  It was getting late so we served up
and ate and I neglected to take a picture
so you could see how yummy looking it is topped with sloppy joes.